Denon AVR-486S 7.1-Channel Home Theater Receiver
Denon AVR-486S 7.1-Channel Home Theater Receiver
Manufacturer: Denon
Product Type: CE
Editorial Review:
Product Description
The AVR486S's chassis is designed to absorb vibration, supporting its large transformer inside a highly rigid frame to secure it more solidly. In addition, a cushioning material is used around the core of the transformer to minimize interference on the signal and allow more faithful reproduction of the original sound. A Twin Drive Rectifier design brings out the maximum potential of this large transformer. Since the rectifiers recharge the large block capacitors at low impedance, they are able to supply ample current to accurately reproduce deep bass as well as sudden bursts of sound. A large heatsink made of extruded aluminum is placed in a design that ensures mostly uniform temperatures so that the output transistors for all channels can be driven under the same conditions. This ensures that all channels respond with equal performance to the demands of the audio signals. The aluminum face plate also helps with the reduction of unwanted noise. Basically, it means that the audio from this Denon 75 watt per channel receiver will actually sound better than other 75 watt per channel receivers. The AVR486S recreates the surround sound produced at the dubbing stage, and it's packed with the most modern surround sound format technologies. 6 Adjustable DSP Surround Modes (Room Size/Effect Level/Tone) Surround Modes - 6 Channel Stereo, Rock Arena, Jazz Club, Video Game, Matrix, Mono Movie High Resolution 32-Bit Floating Point DSP High-Current, Discrete Amplifiers, Independent Power Supplies Large Aluminum Extruded Heatsink Low Impedance Drive Capability Stereo/Direct Modes with Pure Analog Path Active Center Channel in All Surround Modes Auto Surround Mode (Analog or Digital Input Type) Banana Plug Speaker Terminals for All Channels Front A/B Speaker Selector 56-Station Auto-Preset Memory Tuning (FM Only) Direct Function (Tone Bypass) Subwoofer Pre-Amp Output Relay-Controlled Protection Circuit
Amazon.com Product Description
Enjoy high-end, encompassing surround sound while watching the latest Hollywood big-budget spectacles on DVD with the Denon AVR-486S 7.1-Channel Home Theater Receiver. This receiver drives all the primary speakers in a 7.1 surround sound system, including the front left/right speakers, rear left/right surrounds, front/rear center speakers, and the preamp output for a ".1" low-frequency subwoofer. Because not everyone is ready to fill their listening environment with seven speakers, the AVR-686S also offers selectable modes for 5.1-channel set-ups, as well as a Virtual Surround function that provides an enveloping sound for two-speaker systems or headphones. Power wise, the receiver checks in at 75 watts per channel into 8 ohms (from 20 Hz to 20 kHz).
 Enjoy high-end, encompassing surround sound with the Denon AVR-486S 7.1-channel receiver. View larger. |
 Back panel includes plenty of inputs and outputs for all your home-theater component needs. View larger. |
 Included remote control. View larger. |
The AVR-486S owes its superlative sound quality to its premium digital-audio technologies, such as the Hammerhead SHARC 32-bit floating-point digital signal processor from Analog Devices. The receiver also offers 24-bit, 96 kHz analog-to-digital conversion on all stereo analog inputs (except the multi-channel analog jacks), along with 24-bit/192 kHz digital-to-analog conversion for all seven channels to ensure premium playback sound.
On top of the surround processing modes, the AVR-486S offers adjustable high- and low-pass crossovers (40, 60, 80, 100, 120, 150, 200, and 250) that let you tailor the sound to suit your speakers and listening space. Video connectivity stems from the three assignable sets of component video inputs, three S-video inputs, and three component inputs. Audio-wise, the receiver includes nine analog RCA stereo inputs and three digital inputs (two coaxial and one optical), along with a six-channel external analog input. The receiver measures 17.1 by 5.8 by 16.4 inches (W x H x D).
What's in the Box
Receiver, RC-1001 remote control, two R6P/AA batteries, AM loop antenna, FM indoor antenna, service station list, operating instructions, and warranty.
Average customer rating: Similar Items:
|
BlackBerry Pearl JAVOScreen 2.0 Ultra Clear Screen Protector
Manufacturer: JAVOedge International Product Group: Wireless Binding: Wireless Phone Accessory ASIN: B000LJYZ92 |
Accessories
| Categories
| Cell Phones & Service
| Brand
| Phone Manufacturers
| Type
Product Description
Miraculous glass like crystal clarity! JAVOScreen 2.0 will maintain the life and vivid color of your device. Designed specifically to guard your sensitive device from unexpected bumps and scratches. It is the perfect product if you put your device in pant pockets or purses. A special mixture in the plastic used for the JAVOScreen 2.0 refracts 99% of UV rays from reflected light which in turn protects your eyes. All JAVOScreen 2.0 packages include a free soft nylon cleaning cloth as well as an installation card tool. JAVOScreen 2.0 is completely removable, washable (with mild hand soap and cool water), and reapplicable. This allows the JAVOScreen 2.0 to be a long lasting investment for your device. JAVOScreen 2.0 is the smart way to protect your device!Electronics:
Consumer Electronics
IBM THINKCENTRE A50SMB P4-2.8G 40GB
Af100xl 3m Anti-glare Computer Filter/glare Reduction/conrast
Compaq ProSignia 150 - K6-2 380 MHz - RAM : 64 MB - HD : 6.4 GB - DVD - Win98 - 14.1" TFT 1024 x 768
Minolta Dimage S304 3MP Digital Camera w/ 4x Optical Zoom
Toshiba Tecra 8000 - PII 400 MHz - RAM : 64 MB - HD : 6.4 GB - DVD - Win98 - 14.1" TFT 1024 x 768
Fujitsu Siemens LifeBook C1320 - Pentium M 760 / 2 GHz - Centrino - RAM : 1 GB - HD : 80 GB - DVD